Machine Source International, Inc.
Wire & Fastener Machinery Specialists ___
COLD HEADERS DOUBLE
STROKE:
9/64 x 3/4 Nakashimada
H-10A, 350ppm, Re: 8474
3/16 National M56,
bushing cutoff, 350ppm, Re: 7188
3/16 x 1-1/4 Sima P4,
400ppm, Re: 7926
3/16 x 1-3/8 Sacma
SP-01, 350ppm, Re: 5573
3/16 x 2-1/4 Greenbat
#1, 120ppm, Long Stroke, Re: 8515
3/16 x 2 Chunzu CH-5L,
1980s, PKO, 200ppm, Re: 8175
3/16 x 1-9/16 National
51MS, PKO, bushing cutoff, 470ppm, Re: 8514
3/16 x 1-1/2
Nakashimada NH-15B, 270ppm, w/ drawer, Re: 8512
1/4 Carlo Salvi Model
RF645, PKO, 400ppm, Re: 8513
1/4 x 1 Nakashimada
H-20, PKO, 200ppm, Re: 8475
1/4 x 2 Nakashimada H-20A, PKO, 200ppm, w/drawer,
Re: 8507
1/4 x 2 Sacma SP-11,
275ppm, PKO, Re: 5574
1/4 x 2 Carlo Salvi
RF/M, 250ppm, 8.5HP, Re: 8188
1/4 x 3 Waterbury
Waterbury Long Stroke, 150ppm, Re: 7373
1/4 x 4-1/8 Nakashimada
H-20F, PKO, 100ppm, w/ drawer, Re: 8506
5/16 x 1-1/2 National,
built 1950s, 125ppm, Re: 7374
3/8 National M10 Long
Stroke, w/RMG wire drawer, Re: 8504
3/8 x 2-3/4 Asahi Okuma
AOS10, 180ppm, pko, w/F.E drawer, Re: 8502
1/2
x 4-3/4 Sacma SP-31, 125ppm, pko, 1980, Re: 7701
3/4 x 7 Hilgeland
CH6VA, 63ppm, 30kw, Re: 5580
1
x 12 National Long Stroke, PKO, load monitor, conveyor, 35ppm, Re: 8457
COLD HEADERS OPEN DIE:
1/4
x 8 Toke Model TL-500, 60ppm, built 1980, Re: 8262
3/8
x 6 Manville #3 Open Die, sound enclosure, Re: 7964
3/8 x 6 Waterbury
#22, 80ppm, Re: 7377
1/2
x 20 Toko Model TL-350, built 1997, 40ppm, Re: 8380
3/4
x 8-1/2 Waterbury #50 Open Die, 65ppm, Re: 7415
RE-HEADERS
3/8 Toko TPHW-300,
1980s, 150mm crank stroke, Re: 8205
1/2 Toko TPHW-350,
1990s, 18.5kw, 160mm crank stroke, Re: 8206
2-DIE
2-BLOW COLD FORMERS
5/32
x 2 Nakashimada TH2-4A, 1990, 240ppm, stripper, bushing cutoff, Re: 8476
5/32
x 2 Asahi Okuma AOT-4L, 1989, 350ppm, stripper, bushing cutoff, Re: 8477
5/32
x 2-23/64 Asahi Okuma AOT-4XL, 1986,
300ppm, bushing cutoff, Re: 8478
5/32 x 2-5/32 Asahi
Okuma AT-440, 90s, 380ppm, stripper, Re: 8479
3/16 x 1 Asahi Okuma
AT-425, 440ppm, Re: 7661
1/4 x 1-3/8 Asahi Okuma
AOT-4B, 300ppm, 1984, Re: 8263
1/4 x 2 Asahi Okuma
AT-650, 280ppm, pko, Re: 8177
1/4 x 3 Nakashimada
TH2-6A, 230ppm, 1984, pko, Re: 7912
1/4 x 3-3/4 Asahi Okuma
AOT-6XL, 220ppm, Bushing cutoff, 80s, Re: 8480
23/64 x 2-3/8 Jern Yao,
PKO both punches, 200ppm, wire drawer, Re; 8321
3/8 2-5/32 Chunzu
CDH-82, 1999, 250ppm, Ace monitor, Re: 8466
18mm Sakamura HBF-240,
180ppm, pko, vari driver, RMG drawer, Re: 8498
1/2 Sakamura HBP-225,
180ppm, pko, vari driver, RMG drawer, Re: 8499
2-DIE
3-BLOW COLD FORMERS
1/4 x 2-1/4 National
Model 34, pko, bushing cutoff, 200ppm, Re: 8163
5/16 x 2 Omega 123,
1980s, 280ppm, pko, Re: 7394
5/16 x 2-3/4 Mekifasa
E-23-M8, 80mm cutoff length, Re: 8417
5/16 x 2-5/32 Asahi
Sunac RH-60, 200ppm, stripper, trim, 90s, Re: 8486
5/16 x 2-3/8
Nakashimada PF-860, 120ppm, FE drawer, Re: 8501
3/8 x 4 Nakashimada
PF-1080, 100ppm, w/coil payoff, Re: 8500
1/2 x 3-9/16 Asahi
Okuma ORH-120, pko, Re: 7927
1/2 x 5 National Model
89, PKO, FE wire drawer, 100ppm, Re: 8497
2-DIE
4-BLOW COLD FORMERS
1/4 x 1-1/2 Waterbury
#2, 2D4B with stipper mechanism, Re: 7989
3/8 x 3-1/4 Waterbury
#3, 2D4B, 100ppm, Re: 7915
1/2 x 3-3/4 Waterbury
#4, 2D4B, 70ppm, Re: 7916
BOLT
TRIMMERS
5/16 x 3-5/32 Hilgeland
ME2V, 1970, 200ppm, Re: 8540
5/16 x 3-5/32 Sacma
ESA-1, 1978, 160ppm, Re: 8469
3/8 x 3-1/2 Waterbury
#2, Re: 7385
1/2 x 4-3/4 Sacma
ESA-2, 120ppm, Re: 4290
3/4 x 7 Hilgeland Model
A-6, Re: 5581
3/4 x 8 Waterbury #4,
Re: 8345
1 x 12 Waterbury
trimmer, hopper, Re: 8459
BOLT
MAKERS (3 & 4 DIE)
5/16 x 3-5/32
Nedschroef BV-2, 4-Die, 240ppm, 1990s, Re: 5555
5/16 x 2-9/16 Sacma
SP-27, 4-Die, pko, 275ppm, Re: 5576
5/16 x 3-5/32
Nedschroef BV-2, 4-Die, pko, 1990, many extras, Re: 8581
3/8 x 3-1/8 National
6L4, 4-Die, 220ppm, 1980s, pko, Re: 7699
3/8 x 3-1/2 National,
3-Die, 85ppm, Re: 7906
3/8 x 3-1/2 National
S3, 4-Die, 120ppm, pko, IFO, Re: 8463
3/8 x 4 Nedschroef
NB412, 4-Die, 2000, 240pm,pko, many extras, Re: 8582
1/2 x 3-3/4 National
8L4, 4-Die, pko, 185ppm, 1980s, Re: 7697
1/2 x 5 National,
3-Die, 70ppm, Re: 8284
1/2 x 5 National,
4-Die, 75ppm, Re: 8489
1/2 x 5 National S2,
4-Die, 1979, pko, tko, 85ppm, Re; 8398
17/32 National 8BMS-C,
IFO, tko, trim, monitor, 165ppm, Re: 7992
5/8 Nedschroef NB416,
4-Die, 180ppm, 1990s, pko, payoff, Re; 8490
5/8 x 6 National,
4-Die, 60ppm, 1970s, 75HP, Re: 8462
5/8 x 6 National,
4-Die, 60ppm, 1980, pko, 75HP, Fully Rebuilt, Re: 8441
3/4 x 6 National,
3-Die, No pko or pointer, Re: 7878
3/4 x 6-5/16 National
M20, 4-Die, 90ppm, Re: 8296
3/4 x 8National M20
Long Stroke, pko, 60ppm, 4-Die, straightener, Re: 8491
MULTI
DIE COLD FORMERS (3, 4, & 5 DIE )
1/4 x 1 Kieserling
H-430, 4-Die, PKO, 270ppm, monitor, 1980, Re: 7873
3/8 PAM Model 10, 4-Die,
IFO, PKO, 1990, Re: 8429
3/8 National FXP34L Long
Stroke, 4-Die, s. enclosure, sorter, Re: 8494
3/8 x 3
Chunzu CBF-83S, 3-Die, built 2002, 200ppm, Re: 8426
1/2 x 4
Hatebur BKA-2, 4-Die, IFO, PKO, 130ppm, Re: 8430
1/2 x 4
Sakamura S-340, 3-Die,, pko, ifo, trim, Re: 8208
1/2 x 4
Sacma SP-25, 4-Die, built 1980, pko, Re: 4765
19/32 x 5 Schuler
GB15-5, 5-Die, PKO, IFO, 110ppm, 1980s, Re: 8473
5/8 x 5-1/8 Sacma
SP-35, 4-Die, 70ppm, Re: 6275
5/8 x 5-1/2 Ceva NF53,
4-Die, Re: 5579
5/8 x 6-1/2 National
FXP53L, 3-Die, Long Stroke, Re: 8465
18mm x 5-1/8 Asahi Okuma
OBF-160, 4-Die, tko, pko, 100ppm, Re: 8123
3/4 x 6-5/16 Sakamura
BP-460, 4-Die, 65ppm, w/ threadroller, Re: 8307
1 x 4-3/4 Kieserlng
F35, 5-Die, pko, 250ppm, s. enclosure, Re: 8012
1 x 7-1/2 Sakamura
NBP-480, 4-Die, pko, w/threadroller, Re: 8308
PARTSFORMERS
( 5 & 6 DIE )
9/16 Waterbury #2 5-Die,
100ppm, 85heading tons, Re: 8560
18mm x 35mm Sakamura
PF-530, 5-Die, 100pm, 73mm die dia, Re: 8487
18mm x 35mm Sakamura
PF-530 (copy), 5-Die, 100pm, fully rebuilt, Re: 7941
3/4 National Model 750,
5-Die, 70ppm, PKO, Re: 7955
3/4 National Model 750,
6-Die, 70ppm, PKO, Re: 7763
3/4 National Model
750S3, 5-Die, 70ppm, Universal, 1985, Re: 8588
1 x 2 Kumsung/Daito
514, 5-Die, Fully Rebuilt, PKO, Re: 8440
NUT
TAPPERS
3/16 Shimazu Super-1,
dual spindle, Re: 5594
1/4 Shimazu Super-2R,
1990s, 50ppm, (for round nuts), Re: 8481
1/4 Shimazu Super 2,
dual spindle, 1980s, Re: 7730
1/2 Nutap GA-12, Single
Spindle, 1996, 1500pph, Re: 8244
1/2 Nutap MAS-14, dual
spindle, Re: 7606
1/2 Shimazu Super-4,
dual spindle, Re: 5596
5/8 Shimazu Super 5F,
dual spindle, setup for flange, 1986, 70ppm, Re: 7126
3/4 Nutap MAS-20, dual
spindle, Re: 7606
3/4 Shimazu Super-6,
dual spindle, Re: 5596
1-1/4 Nutap MAS-33, dual
spindle, Re: 7605
NUT
FORMERS
1/4 National, 110ppm,
1/2 across flats, Re: 7427
5/16 National, 9/16
across flats, 95ppm, Re: 8245
5/16 National S2,
200ppm, 9/16 across flats, Re: 7810
3/8 National M12,
150ppm, 3/4 across flats, 20hp, Re: 8422
3/8 National M12S2,
built 1988, 150ppm, 3/4 across flats, TKO,
feed shutoff, finger spreading 3rd, 4th,
5th, bushing cutoff, Re: 7424
1/2 National M16S2,
1978, 120ppm, 15/16 across flats, 22kw, Re: 6925
1/2 Jern Yao Model
JNF-14B5S, 1994, 230ppm, Re: 8294
5/8 National M20 S2,
105ppm, 1986, 1-3/16 across flats, Re: 7836
3/4 Waterbury Farrel #6,
60ppm, 1-5/16 across flats, wire decoiler, Re: 8396
1 Azov Model AA1824S1,
built 1990, Re: 8186
1 National, wire
decoiler, many accessories, 1-5/8 across flats, Re: 8395
HOT NUT
FORMERS
1.300 Nedschroef MW-48,
1990, 150ppm, heater & bar rack, Re: 8582
1.417 Sakamura HNP-80,
built 1980s, 135ppm, Re: 8306
1.417 Sakamura HNP-80SS,
new ajax induction heater, bar rack, fully rebuilt,
siemens computer system, Like New Re: 8388
1.500 Hatebur AMP-20,
with heater and bar rack, 180ppm, Re: 8311
2.519 Hatebur AMP-30,
with heater and bar rack, 120ppm, Re: 8400
4.500 Hatebur AMP-70
with heater - Hatebur bar rack, 70ppm, Re: 8452
POINT
FOMERS
5/16 x 4 Ingramatic
PA-2, 1980s, Re: 8113
3/8 x 5-3/16 Hilgeland
PN-4, vibratory feeder, Re: 8529
3/8 6 Economy Model
4600, Re: 7393
1/2 x 5-3/16 Ingramatic
PA-3, 800ppm, Re: 8112
3/4 x 11 Asahi Okuma
AOP-20B, 1990s, 140ppm, Re: 8385
SCREW
HEAD SLOTTERS
1/8 x 1-1/4 Warren
WS-500, 1000ppm, Vari-speed, Re: 8059
5/16 x 2 Warren
WS-1000, 600ppm, Vari-speed, Re: 7716
SHAVERS
11/16 x 4 Towa Model
TO-3A, w/collet chuck & vibratory feeder, Re:
8551
SHANK
SLOTTERS
3/8 Fastener Engineer
#476, 1980, vari speed, 400ppm, Re: 7213
3/8 x 2-1/2 Behr Model
#100, Re: 8549
THREADROLLERS
( INCLINE & ROTORY DIE)
3/16 x 2-1/2
Hartford/Tanisaka 0-400, 1995, vibratory feed, Re: 8545
3/16 x 2-1/2 Hartford
0-500, 500ppm, vibratory feed, Re: 8546
1/4 x 2-19/32 Sacma
RU-1, 400ppm, Re: 7700
1/4 x 3 Ingramatic
RP-1, built 1981, 600ppm, Re: 8535
1/4 x 3-1/8 Hilgeland
R1L, 600ppm, 1986, 7.0kw, 60mm thread, Re: 7232
1/4 x 8 Waterbury #10,
incline, 2 threadlength, 100ppm, Re: 8062
5/16 x 1-3/4 Ingramatic
GR2-2R, rotory die, with Assembly washer, Re: 8533
5/16 X 4 Hartford
10-300, 300ppm, Sems rollers with Ingramatic
washer assembly and vibratory feeder, Re: 8543
5/16 x 3-5/32 Hilgeland
R2L, 1982, 450ppm, vibratory feeder, Re: 8532
5/16 x 3-1/2 Ingramatic
RP-2, 410ppm, 2 threadlength, Re: 5585
3/8 x 3-37/64 Chunzu
DPR-10S, 2001, 170ppm, many dies, Re: 8427
3/8 x 4 Hartford
10-400, 400ppm, vibratory feed, Re: 8547
3/8 x 4 Ingramatic
GR-3, rotory die, 800ppm, Re: 8149
3/8 x 8 Waterbury #20,
Chainfeed, 100ppm, 3 threadlength, Re: 8525
1/2 x 4 Hartford
20-225, 225ppm, vibratory feeder, Re: 8527
1/2 x 5-1/8 Saspi
RGVP3-20, built 2000, with pointer attachment, Re: 8495
1/2 x 5-1/8 Hilgeland
TR-4/PNL, 1980, 140ppm, (pointer removed), Re: 8536
1/2 x 5-1/8 Hilgeland
TR-4, 180ppm, vibratory feeder, Re: 8530
1/2 x 8 Waterbury #30,
Chainfeed hopper, 80ppm, 4 thread, Re:
8526
9/16 x 5-1/8 Peltzer
& Ehler NKW-12, 150ppm, 11kw, vibe feeder, Re: 7214
5/8 x 5-1/8 Peltzer
& Ehler NKWK-16, 110ppm, 3-5/32 thread, Re: 7215
3/4 x 7 Hilgeland TR-6,
Incline Flat Die, 100ppm, 4 thread, Re: 8348
7/8 x 2-3/4 Sakamura
SSR-70, rotory die, 120ppm, 1970s, Re: 8276
1 Waterbury #60, Hand
Feed, 30ppm, Moving/Stationary die: 16-15,
Setup with auto feed hopper, Re: 8458
THREADROLLERS
( HORIZONTAL HAND FEED FLAT DIE)
1/4 x 2 Waterbury #10
Hand Feed, 60ppm, Re: 7381
3/8 x 3-1/8 Waterbury
#20 Hand Feed, 60ppm, Re: 8541
1/2 x 4-1/8 Waterbury
#30 Hand Feed, 60ppm, Re: 8539
5/8 x 4-5/8 Waterbury
#40, Hand Feed, 50ppm, Adj. pitman, Re; 8410
3/4 x 5-1/8 Waterbury
#50, Hand Feed, 30ppm, Reconditioned, Re: 8344
1 Waterbury #60, Hand
Feed, 30ppm, Moving/Stationary die: 16-15, Re: 8458
THREADROLLERS
( 2-DIE CYLINDRICAL)
2-3/4
WMW UPW 12.5x70, 2-Die Cylindrical thread roller, 1980s, Re: 8110
4
WMW UPWS-25, 2-Die Cylindrical, 1988, 7.5kw, spindle dia: 80mm, Re: 7440
8
WMW UPW-63, 2-Die Cylindrical roller, 250mm infeed, 2,000mm thrufeed, Min/Max distance of spindles:
200/420mm, Reconditioned, Re: 8468
NAIL
MACHINES
0.047 x 1 Tanisaka
MTG-A, 550ppm, built 1989, Re: 8482
0.0625 x 1-3/16 Vitari
Model V10, 580ppm, Re: 8471
0.094 x 2 Vitari Model
V14, 480ppm, Re: 8472
0.095 x 2 Tanisaka
MTG-B, 500ppm, built 1989, Re: 8483
0.135 x 2-1/2 Glader
#1, 400ppm, 5HP, Re: 6659
0.135 x 3-1/2 Tanisaka
MTG-C, 350ppm, built 1988, Re: 8484
0.165 x 4-3/8 Tanisaka
MTG-D, 280, built 1986, Re: 8485
0.165 x 5 Wafios N-5,
430ppm, Re: 5474
0.283 x 7 Glader #4,
190ppm, 15HP, Re: 6825
0.375 x 12 Glader #5,
160ppm, 20HP, Re: 5482
SPIKE
MACHINE
Hot Foring Voronezh
K28.046 railroad spike making line,
includes entire line,
heater, cooling system, feeding and
exit conveyors, built
2002, Re: 8187
UPSETTERS
2-1/2 Ajax, currently in
production, Re: 8404
3 Voronezh B-1134, 1975,
250tons, Max. upsetting ram stroke 220mm, Re: 7666
3 Smeral LKL250-A,
250ton, upsetting stroke 220mm, Excellent, Re: 7262
3 Ajax, Currently under
power, Re: 8405
4 National, 500tons, Re:
8198
4 Ajax, Currently under
power, Re: 8406
5 Ryzaan VB-1139, 1992,
800tons, max upsetting ram stroke 380mm, Re: 8039
6 National, 1300tons,
1951, Re: 8182
8 Ajax, 24 stroke,
150kw, 25spm, Re: 8573
8 Novokramatorsk B1143,
2000tons, max upsetting ram stroke 570mm, Re: 8192
9 Karamatorsk B-1145,
325HP, 3150tons, 1979, Re: 8169
Complete Plant for the
Production of High Tensile
Torque Shear Bolts, Nuts and
Washers up to 1 Diameter
Plant
includes: Sakamura Cold Formers and Hot Nut Formers, Furnaces, Assembley
Machines, Nut Tappers,Threadrollers, Shot Blasting, Wire Drawers, Hatebur Hot
Nut Former, Induction Heaters, Hydraulic Press,
Air
Compressor, Torque testing machines, and an extensive amount of tooling,
machine parts, drawings, etc. All machines currently under power.
For
more information please contact us.
Complete Production line
for the manufacturing of Washers up to M36
Consisting of 160ton Rhodes mechanical press complete with a flat strip
de-coiler & feeder unit, tooling, parts and is currently in
service used for the automatic production of washers, Tooling from M12 to M36. Washers
would also be available.
For
more information please contact us.
Complete Cell for 1 Diameter x 12 Long Parts
This
cell includes 1 x 12 Double Stroke Solid Die Cold Header, 1 x 12 Bolt
Trimmer, and 1 Heavy Duty Flat Die Threadroller,
including
monitors, conveyors, automatic feeders, tooling parts, drawings, manuals, etc.
For
more information please contact us.
Complete Hot Nut Forming Plant
This plant is still in production. Equipped with
Nedschroef Model MW-48 Hot Nut Former for nuts M20-M33. Annual nut production
based on 70% efficiency is 25,000,000 nuts. Newelco 1000kw induction heater
with extra coils, Automatic barfeeding equipment for 6 meter long bars, Water
cooling systems, Tooling for M18 and M20 flange nuts, Hex nuts, Clevelock nuts,
Durlock nuts, andHexagon nuts.
Machine Source
International, Inc.
232
Piccadilly Downs, Lynbrook, N.Y. 11563, USA
Tel:
516-596-6600 Fax: 516-596-6700
Contact:
Mr. Robert Kleinertz
Email:
Machinesource@optonline.net