Machine Source International, Inc.

Wire & Fastener Machinery Specialists ___

232 Piccadilly Downs, Lynbrook, NY 11563, USA • Tel: (516) 596-6600 • Fax: (516) 596-6700

FASTENER MACHINERY SALE

COLD HEADERS – DOUBLE STROKE:

1/8” x 1” Hartford Model 2-425, pko, 425ppm, Re: 9615

1/8” x 1” National Model 31MS, pko, 550ppm, Re: 9708

1/8” x 2” National Model 31LS, pko, 400ppm, Re: 9709

5/32” x 1” Hartford 2-450, 1970s, 425ppm, Re: 9579

3/16” x 1-1/4” National, pko, b/c, 350ppm, Re: 9631 (5 avail.)

3/16” x 1-1/4” Sima Model P4, 400ppm, Re: 9286

3/16” x 1-1/2” Nakashimada NH15B-E, 270ppm, 1990, Re: 9453

3/16” x 1-3/8” Sacma SP-01, 350ppm, Re: 5573

3/16” x 2” Hartford 3-300LS, pko, 300ppm, Re: 9629

3/16” x 2-1/4” Greenbat #1, 120ppm, Long Stroke, Re: 8515

3/16” x 2” Chunzu CH-5L, 1980s, pko, 200ppm, Re: 8175 (2 avail.)

3/16” x 1-9/16” National 51MS, pko, bushing cutoff, 470ppm, Re: 9711

3/16” x 1-1/2” Nakashimada NH-15B, 270ppm, w/ drawer, Re: 8512

3/16” x 2-3/8” National 51LS, pko, bushing cutoff, 470ppm, Re: 9712

1/4” Carlo Salvi Model RF645, pko, 400ppm, Re: 8513

1/4” x 1-3/16” National 61MS, 400ppm, Re: 8998

1/4” x 1-3/16” National Model #5, pko, 400ppm, Re: 8733

1/4” x 1-3/8” National M68, High Speed, 300ppm, Re: 8634

1/4” x 2” Nakashimada H-20A, pko, 200ppm, w/drawer, Re: 9522

1/4” x 2” Sacma SP-11, 275ppm, pko, Re: 5574/8736

1/4” x 2” Carlo Salvi RF/M, 250ppm, 8.5HP, Re: 8188

1/4” x 2” Carlo Salvi Model INT/CL, Re: 9366

1/4” x 2-3/4” National 61LS, 300ppm, Re: 8999

1/4” x 3” Nakashimada H20C, Re: 9522 (2) available

1/4” x 4-1/8” Nakashimada H-20F, pko, 100ppm, w/ drawer, Re: 8506

5/16” x 3” Nakashimada Model H-25, Re: 9524

5/16” x 3-3/16” Sacma SP-21, 200ppm, pko, Re: 9634

3/8” National M10 Long Stroke, w/RMG wire drawer, Re: 8504

3/8” x 2-3/4” Asahi Okuma AOS10, 180ppm, pko, w/F.E drawer, Re: 8502

3/8” x 4-3/4” Peltzer & Ehler, EKP10, 150ppm, 1971, Re: 9357

3/8” x 5” Hilgeland CH3LAZ Long Stroke, 1979, pko, Re: 9551

1/2” x 3-1/4” National Model 810, Bushing cutoff, pko, Re: 9480

1/2” x 4-3/4” Sacma SP-31, 125ppm, pko, 1980, Re: 9200

1/2” x 5” Fide, two available, Re: 8678

1/2” x 8” Fide, Long Stroke, 85ppm, Re: 8707

5/8” x 6-3/8” Hilgeland CH5-C, 1960s, 70ppm, 19Kw, Re: 8615

11/16” x 4-3/8” Sakamura K-50, pko, b/c, 1980s, Re: 9647 (2 avail.)

3/4” x 7” Hilgeland CH6VA, 63ppm, 30kw, Re: 9545

3/4” x 8” Ryzaan Model AB1223, 70ppm, pko, 50hp, Re: 8594

1” x 8” Hilgeland CH-7, 50ppm, 1970s, Re: 9560

1” x 8” National Long Stroke, Re: 9570

1” x 12” Greenbat Long Stroke, pko, load monitor, conveyor, 35ppm, Re: 8457

COLD HEADERS – SINGLE STROKE:

1/8” x 3/4” National SSSD, 400ppm, Re: 9627/9628 (2 avail)

1/4” x 2-3/4” Hilgeland CH-1, setup for rivets, Re: 9626

7/8” x 6” Kuhne SSSD, 90ppm, suitable for solid rivets, studs

and bolts with small head volume, Re: 7287

COLD HEADERS – OPEN DIE:

1/4” x 8” Toke Model TL-150, 60ppm, built 1980, Re: 8262

3/8” x 6” Manville #3 Open Die, sound enclosure, Re: 7964

3/8” x 6” Waterbury #22, 80ppm, Re: 7377

3/8” x 15-3/4” Toko Model TL-300, 45ppm, 11kw, Re: 9728

1/2” x 20” Toko Model TL-350, built 1990s, 18.5kw, 40ppm, Re: 9735

5/8” x 20” Toko Model TL-400, built 1979, Re: 9575

3/4” x 8-1/2” Waterbury #50 Open Die, 65ppm, Re: 7415

BALL HEADERS

5/16” Hilgeland Model HK4-5, 1990s, 920spm, Re: 9307

9/16” National Model 141, 1987, 425ppm, Re: 8746

3/4” Hilgeland HK15-20, 19990s, 320spm, 45kw, Re: 8897

3” Hill Acme Hot Ball Header, w/heater, Re: 9620

RIVET HEADERS

3/16” x 1-3/4” Carlo Salvi RF/476/SV, 1985, Excellent, Re: 9522 (2)

1/4” x 2” Carlo Salvi RF/M, 250ppm, 8.5HP, Re: 8188

1/4” x 2” Carlo Salvi INT/CL, Re: 9366

1/4” x 2-3/4” Hilgeland CH-1, setup for rivets, Re: 9626

RE-HEADERS

1/4” Toko TPHW-250, 1970s, 60mm crank stroke, Re: 9103

3/8” Toko TPHW-300, 1980s, 150mm crank stroke, Re: 9104

1/2” Toko TPHW-350, 1990s, 18.5kw, 160mm crank stroke, Re: 9105

2-DIE 2-BLOW COLD FORMERS

3/16” x 1” Asahi Okuma AT-425, 440ppm, Re: 7661/8714

1/4” x 1-3/8” Asahi Okuma AOT-6B, 300ppm, 1984, Re: 8176

1/4” x 2” Asahi Okuma AT-650, 280ppm, pko, Re: 8177

1/4” x 3” Nakashimada TH2-6A, 230ppm, 1984, pko, Re: 7912

5/16” x 2-3/16” Asahi Okuma AT-855, built 1997, 275ppm, Re: 9603

5/16” x 2-3/16” Asahi Okuma AOT-8B, 250ppm, 80s, Re: 9633

5/16” x 4” Asahi Okuma AT-810, pko, 200ppm, Re: 9521

5/16” x 4” Sacma SP-22, 170ppm, pko, Re: 8734

3/8” x 5-1/8” Asahi Okuma AOT-10XL, pko, bc, RMG drawer, conveyor,

PD sensor, wire prestraightener, welder, 140ppm, Re: 9729

1/2” Sakamura HBP-225, 180ppm, pko, vari driver, RMG drawer, Re: 8499

2-DIE 3-BLOW COLD FORMERS

1/4” x 2-1/4” National Model 34, pko, bushing cutoff, 200ppm, Re: 8163/8742

5/16” x 2” Omega 123, 1980s, 280ppm, pko, Re: 7394/9717 (2avail)

5/16” x 2-3/4” Mekifasa E-23-M8, 80mm cutoff length, Re: 9438

5/16” x 2-3/8” Nakashimada PF-860, 120ppm, FE drawer, Re: 9632/9707 (2)

3/8” x 4” Nakashimada PF-1080, 100ppm, w/coil payoff, Re: 8500

1/2” x 2-1/2” National Model S1, 150ppm, IAC, pko, b/c, Re: 9716

1/2” x 3-9/16” Asahi Okuma ORH-120, pko, Re: 7927/9419 (2)

1/2” x 5” Fide Model E23-M12, 90ppm, 1980s, Re: 9625

1/2” x 5” National Model 89, PKO, FE wire drawer, 100ppm, Re: 8497/9089 (2)

5/8” x 5-1/8” Hilgeland Model CF-5, 100ppm, 52kw, pko, Re: 9547

2-DIE 4-BLOW COLD FORMERS

1/4” x 1-1/2” Waterbury #2, 2D4B with stipper mechanism, Re: 7989

3/8” x 3-1/4” Waterbury #3, 2D4B, 100ppm, Re: 7915, 8676

1/2” x 3-3/4” Waterbury #4, 2D4B, 70ppm, 185tons heading, Re: 9646

BOLT TRIMMERS

5/16” x 3-5/32” Hilgeland ME2V, 1970, 200ppm, Re: 8540

5/16” x 3-5/32” Sacma ESA-1, 1978, 160ppm, Re: 8469

3/8” x 3-1/2” Waterbury #2, Re: 7385

1/2” x 4-3/4” Sacma ESA-2, 120ppm, Re: 4290

5/8” x 6” Yoshihara YT-5, 40ppm, Re: 9482

3/4” x 7” Hilgeland ME-6, 100ppm, 1979, Re: 9544

1” x 10” Yoshihara Model YT-8, w/conveyor, Re: 9710

1-3/16” x 12” Waterbury trimmer, hopper, 40ppm, Helpro monitor,

upgraded to allow use as extrusion machine capable of

extruding bolts M30 x 300mm length, with stand alone hydraulic

unit, feeding hopper, Re: 8459

NEW BOLT-NUT-WASHER ASSEMBLY MACHINES AVAILABLE

Please give us the dimensions and we will quote a new machine.

BOLT MAKERS (3 & 4 DIE)

1/4” x 1-1/4” National Model 4L4 High Speed 4-Die, 300ppm, Re: 9502

5/16” National 3-Die, 90ppm, Re: 8759

5/16” National 4-Die, Re: 9342

5/16” x 1-9/16” Nedschroef BS-2, 4-Die, 280ppm, Re: 9236/37 (2)

5/16” x 1-3/4” Sacma SP-17, 4-Die, 350ppm, pko, b/c, Re: 9695

5/16” x 2-1/2” National 5L4, 4-Die, 250ppm, pko, Re: 9552

3/8” x 2-9/16” Sacma SP-27, 4-Die, pko, 1990, 275ppm, Re: 5576/8706 (2)

3/8” x 3-1/8” National 6L4, 4-Die, 220ppm, 1980s, pko, Re: 9501/9550 (2)

3/8” x 3-1/2” Sacma SP-27L, 4-Die, Long Stroke, PKO, 220, Re: 9537

3/8” x 3-1/2” National, 3-Die, 85ppm, Re: 7906

3/8” x 3-1/2” National Model S3, 4-Die, pko, ifo, 120ppm, Re: 9098

3/8” x 4” Nedschroef NB412, 4-Die, 2000, 240pm,pko, many extras, Re: 8582

1/2” x 2-1/2” Nedschroef Model BS-4, 4-Die, 240ppm, pko, ifo, Re; 9215

1/2” x 3-3/4” National 8L4, 4-Die, pko, 185ppm, 1980s, Re: 9548/9503 (2)

1/2” x 5” Nedschreof BV-4, 4-Die, pko, vari drive, S.enclosure, Re: 9398

1/2” x 5” National, 4-Die, 75ppm, Re: 8489

1/2” x 5” National Model S2, 4-Die, pko, trim, 1980s, Re: 9693

1/2” x 5” National S3, 4-Die, 1988, trim, pko, tko, 85ppm, Re: 9395/9527 (2)

9/16” x 3-1/2” Sacma SP-37, 4-Die, 220ppm, pko, Re: 9536/9694 (2)

17/32” National 8BMS-C, IFO, tko, trim, monitor, 165ppm, Re: 7992

5/8” Nedschroef NB416, 4-Die, 180ppm, 1990s, pko, payoff, Re; 8490

5/8” x 4-3/4” Malmedie Model QPBA-101, ifo, tko, 4-Die, Re: 8602

5/8” x 4-3/8” National 10L4, 4-Die, PKO, Drawer, Re: 8493

5/8” x 6” Ceva, 3-Die, 55ppm, 1980s, Re: 8705

5/8” x 6” National, 4-Die, 60ppm, pko, Fully rebuilt, 75HP, Re:9403/8441 (2)

3/4” x 6” Chimkent AB1922, 4-Die, 1980, 125ppm, Re: 9234

3/4” x 6-5/16” National M20, 4-Die, 90ppm, Re: 8296/9535 (2)

3/4” x 8” National M20 Long Stroke, pko, 60ppm, 4-Die, straightener, Re: 8491

3/4” x 9-1/2” National M20 Long Stroke, 4-Die, 1980s, Re: 9535

1-3/16” Peltzer & Ehler PM250-3, 3-Die, 1979, 250tonnage, 60spm, Re: 9360

1-9/16” Peltzer & Ehler PM250-3S, 3-Die, 1980, 120spm, Bar rack/feeder,

250tonnage, 96kw, Ortlinghaus clutch/brake, Re: 9361

MULTI DIE COLD FORMERS (3, 4, & 5 DIE )

1/4” x 1” Kieserling H-430, 4-Die, PKO, 270ppm, monitor, 1980, Re: 7873

1/4” x 3” Nakashimada TH3-6A, 3-Die, 1990s, 230ppm, Re: 9639

1/4” x 3-3/8” Malmedie QPB41, 4-Die, 150ppm, Re: 9532

5/16” x 1-3/4” Sacma SP-17, 4-Die, 350ppm, 1982, ifo, pko, trim, Re: 8659

5/16” x 1-3/4” Sacma SP-140, 3-Die, pko, 350ppm, Re: 9698

5/16” x 1-3/4” Sacma SP-150, 4-Die, pko, 350ppm, Re: 9696

5/16” x 1-3/4” Sacma SP-160, 5-Die, pko, 350ppm, 1990s, Re: 9720

5/16” x 2-3/16” Sakamura BP-420, 4-Die, 280ppm, Re: 9676

5/16” x 3-5/32” Malmedie QPB61, 4-Die, 110ppm, Re: 9350

3/8” x 2” Nakashimada MST308, 3-Die, 300ppm, “Like New”, Re: 8942

3/8” x 2-9/16” Sacma SP-260, 5-Die, 275ppm, Re: 9230

3/8” x 6-3/8” National 4-Die Long Stroke, Rebuilt 2008, Re: 9648

3/8” x 8” Ceva 4-Die, built 1982, 55ppm, Re: 8710

1/2” x 4” Hatebur BKA-2, 4-Die, IFO, PKO, 130ppm, Re: 9443

1/2” x 5” Waterbury #3, 4-Die, PKO all stations, IFO, 80ppm, Re: 9479

5/8” x 5” Hatebur BKA-3, 4-Die, PKO, IFO, 100ppm, Re: 9349

5/8” x 5-1/8” Sacma SP-35, 4-Die, 70ppm, Fully Rebuilt, Re: 9396

5/8” x 5-1/2” Ceva NF53, 4-Die, Re: 5579

5/8” x 6” Hanrez PRL-5, 4-Die, 120ppm, Re: 9348

5/8” x 6-3/8” Asahi Okuma OBF-160, 4-Die, pko, rebuilt 08, Re: 9649

3/4” x 5-1/2”” Malmedie QPB-131, 4-Die, pko, ifo, brankamp monitor,

has slug feed setup or wire feed, 80ppm, 250ton heading, Re: 9604

3/4” x 5-3/4” Peltzer & Ehler MM3-5, 5-Die, 160ppm, 103kw, 220mm ram,

Built 1978, Re: 9358

3/4” x 6-5/16” Sakamura BP-460, 4-Die, 65ppm, w/ threadroller, Re: 8307

3/4” x 6-3/8” Ceva 4-Die, 55ppm, Re: 8710

3/4” x 8-5/8” Sacma SP441/L, 4-Die, pko, ifo, 1990s, 90ppm, Excellent, Re: 8109

3/4” x 9” Waterbury #6, 4-Die Long Stroke, PKO, IFO, 60ppm, Re: 9445

1” x 7-1/2” Sakamura NBP-480, 4-Die, pko, w/threadroller, Re: 8308

1-3/16” Peltzer & Ehler PM250-3, 3-Die, 1979, 250tonnage, 60spm, Re: 9360

PARTSFORMERS ( 5 & 6 DIE )

7/16” x 1-3/4” National Formax FX35, 5-Die, Universal transfer, tko, pko, Formapak, 300ppm, Excellent, Re: 9710

9/16” x 1-1/4” Waterbury #2 5-Die, 100ppm, 85 heading tons, Re: 9697

5/8” x 3” National Model 625, 5-Die, 100ppm, PKO, Re: 9399

3/4” x 4” National Model 750, 5-Die, 70ppm, PKO, Re: 7955

3/4” x 4” National Model 750, 6-Die, 70ppm, PKO, Re: 9498

3/4” x 4”National Model 750S1, 5-Die, 65ppm, Re: 9497

3/4” x 4” National 750, 6-Die, Universal Transfer, S.enclosure, New electrics

and lubrication system, Re: 9650

3/4” x 4” National Model 750S3, 5-Die, 110ppm, Universal, 1985, Re: 8588

3/4” x 5” National 750S3 Long Stroke, PKO, IFO, 110ppm, Re: 8590

3/4” x 5-3/4” Peltzer & Ehler MM3-5, 160ppm, 1980, Re: 9358

15/16” x 2-3/4” Waterbury #4, 5-Die, 60ppm, 250ton heading, Re: 9582

1” x 4-3/4” Ryazan Model AA9035, 6-Die, 1997, Re: 9303

1” x 5” National Model 1000, 5-Die, Universal transfer, pko, Re: 9485

1” x 6” National 1000, 6-Die, Universtal transfer, pko, Re: 9528

1” x 7-45/64” National 245 Forming center, 5-Die, 120ppm, ifo, pko, Re: 9699

1” Sakamura Model BPF-550 5-Die Long stroke, Universal transfer, 2002, Re: 8677

1-1/2” x 9” National Model 1500, 5-Die, 50ppm, Re: 9526

NUT TAPPERS

1/4” Shimazu Super-2R, 1990s, 50ppm, (for round nuts), Re: 8481

5/16” Nutap MAS-8, dual spindle, Re: 7608

1/2” Nutap GA-12, Single spindle, 1996, 1500pph, Re: 8244

1/2” Streicher Model TS-10, Re: 9388

1/2” Nutap MAS-14, dual spindle, Re: 7606

1/2” Snow Model NT-3, Single spindle, Re: 9327

1/2” Nutap MAS-14NV, dual spindle, Re: 9384

5/8” Snow Model NT-4, Single spindle, 1hp, Re: 9327 (5 available)

3/4” Nutap MAS-20, dual spindle, Re: 9386 (3 avail.)

3/4” Streicher Model TStar-20, Excellent, used only 5000hrs, Re: 8630

1” Shimazu Super 8, Dual spindle, 5.5kw, Re: 9530

1-1/4” Nutap MAS-33, dual spindle, Re: 7605 (4 available)

NUT FORMERS

1/4” National, 110ppm, 1/2” across flats, Re: 7427

5/16” National, 9/16” across flats, 95ppm, Re: 8709

5/16” National S2, 200ppm, 9/16” across flats, Re: 7810/9466 (2)

3/8” Waterbury #2, 5-Die, 125ppm, Re: 9324/9271 (2)

3/8” National M12, 150ppm, 3/4” across flats, 20hp, Re: 9454

3/8” National M12S2, built 1988, 150ppm, 3/4” across flats, TKO,

feed shutoff, finger spreading 3^rd, 4^th, 5^th, bushing cutoff, Re: 7424

7/16” x 1-3/4” National Formax FX35, 5-Die, Universal transfer, tko, pko, Formapak, 300ppm, Excellent, Re: 9710

1/2” Waterbury #3, 5-Die, 11/16” across flats, Re: 9325

1/2” National M16S2, 1978, 120ppm, 15/16” A/F, 22kw, Re: 6925/9534 (2)

9/16” Lian Shyang, LSCNF14B6SL, 6-Die, 90ppm, pko all stations, Re: 9411

5/8” Nutap Model Remp 16, nut forming line, Re: 9028

5/8” Waterbury #4, 5-Die, 15/16” Across flats, Re: 9326

5/8” Malmedie QPM16, 4-Die, 100ppm, Re: 9359

5/8” National M20 S2, 105ppm, 1986, 1-3/16” across flats, Re: 9467

45/64” Nutap Model Remp 18, nut forming line, Re: 9029

1” National, 5-Die, 50ppm, 1-5/8” across flats, Re: 9492/9400 (2avail)

1” Azov Model AA1824S1, built 1990, Re: 8186

1-9/16” x 2-3/4” Peltzer & Ehler PM250-3S, 3-Die, 1980, 120spm, Bar rack/feeder, 250tonnage, 96kw, Ortlinghaus clutch/brake, Re: 9361

Special Sale: Small nut forming plant for sale, consisting of (3) three nut

formers, 3/8” Waterbury #2, 1/2” Waterbury #3, 5/8” Waterbury #4, (6) Six snow nut tappers, and an extensive amount of tooling/parts. All Waterburys have 5 stages for piercing and forming and were setup to produce hex and rectangular nuts up to M12., Price for whole package: $29,500.USD FOB Truck

This price has been reduced because machines must be moved immediately

from plant site. “subject to prior sale”

NEW BOLT-NUT-WASHER ASSEMBLY MACHINES AVAILABLE

Please give us the dimensions and we will quote a new machine.

HOT NUT FORMERS

1.250” Nedschroef MW-3, 75ppm, w/heater, reconditioned 07’, Re: 9437

1.300” Nedschroef MW-48, 1990, 150ppm, heater & bar rack, Re: 7794

1.417” Sakamura HNP-80, built 1980s, 135ppm, Re: 8306

1.417” Sakamura HNP-80SS, new ajax induction heater, bar rack, fully rebuilt,

siemens computer system, “Like New” Re: 8388

1.500” Hatebur AMP-20, with heater and bar rack, 180ppm, Re: 8311/8654 (2)

1.575” Sakamura HNP-100, built 1980s, 150ppm, Re: 8826

1-9/16” x 2-3/4” Peltzer & Ehler PM250-3S, 3-Die, 1980, 120spm, Bar rack/feeder, 250tonnage, 96kw, Ortlinghaus clutch/brake, Re: 9361

2.519” Hatebur AMP-30, with heater and bar rack, 120ppm, Re: 9622

4.250” National 6-4, 4-Die, 1200tons, 70ppm, heater, bar dia 65mm,

Max. outer diameter 120mm, 1980, Re: 9356

4.500” Hatebur AMP-70 with heater - Hatebur bar rack, 70ppm, Re: 9344

INDUCTION HEATER

Newelco Model SFR 29 Bar induction heating line, built 1990s, never put into

production, 3 section coil set for heating 32mm diameter steel bars, One- Spare 32mm diameter 3 section coil set, One- 920 kW 2.4Khz Tyristor Static Converter

One- 1300 KVA Double Wound Transformer, One- Operators Control Station

One- TASC Drive Motor Gear box and coupling, Re: 9610

HEAT TREATING LINE

Aichelin furnace line for 2000kg/h - 4400lbs/hr range of bolts: M6 x 10mm to M34 x 450mm, Re: 9504

POINT FORMERS

3/8” x 3-3/16” Hilgeland Model PN-3, Re: 8728

3/8” x 4-3/4” Asahi Okuma AOP-10, 160ppm, Re: 9600

1/2” x 5-3/16” Hilgeland PN-4, vibratory feeder, Re: 8529

1/2” x 5-3/16” Ingramatic PA-3, 800ppm, Re: 8112

3/4” x 7-1/8” Hilgeland PN-6, 100ppm, 1979, Re: 9543

SCREW HEAD SLOTTERS

1/8” x 1-1/4” Warren WS-500, 1000ppm, Vari-speed, Re: 8059

5/16” x 2” Warren WS-1000, 600ppm, Vari-speed, Re: 7716

SHAVERS

11/16” x 4” Towa Model TO-3A, w/collet chuck & vibratory feeder, Re: 8551

3/4” x 5-1/8” Towa Model 4BH, built 2000, Re: 8809/10 (2)

SHANK SLOTTERS

3/8” Fastener Engineer #476, 1980, vari speed, 400ppm, Re: 7213

3/8” x 2-1/2” Behr Model #100, Re: 8549

THREADROLLERS ( INCLINE & ROTORY DIE)

1/8” x 1-3/4” Hilgeland Model TR-0, Re: 9525 (2 available)

3/16” x 2-1/2” Hartford/Tanisaka 0-400, 1995, vibratory feed, Re: 8545

3/16” x 2-1/2” Hartford 0-500, 500ppm, vibratory feed, Re: 8546

1/4” EW Menn Model AF-6, built 1999, Re: 9235

1/4” x 3” Ingramatic RP-1, built 1981, 600ppm, Re: 8535

1/4” x 3” Ingramatic RP-1R, 600ppm, Re: 8730

1/4” x 3-1/8” Hilgeland R1L, 600ppm, 1986, 7.0kw, 60mm thread, Re: 7232

1/4” x 8” Waterbury #10, incline, 2” threadlength, 100ppm, Re: 8062

5/16” x 1-3/4” Ingramatic GR2-2R, rotory die, with Assembly washer, Re: 8533

5/16” X 4” Hartford 10-300, 300ppm, Sems rollers with Ingramatic

washer assembly and vibratory feeder, Re: 8543

5/16” x 4” Peltzer & Ehler NKWK8, w/pointer, 180ppm, Re: 9558

5/16” x 3-5/32” Hilgeland R2L, 1982, 450ppm, vibratory feeder, Re: 8532

5/16” x 3-1/2” Ingramatic RP-2, 410ppm, 2” threadlength, Re: 5585

3/8” Bad Duben Model PWP 10E Profiroll rotary die, “Like New”, Re:8666

3/8” x 4” Hartford 10-400, 400ppm, vibratory feed, Re: 8547

3/8” x 5-1/8” TLM RP/10, incline w/ 2 x sems washer assembly, 2000s, Re: 9718

3/8” x 8” Waterbury #20, Chainfeed, 100ppm, 3” threadlength, Re: 8525

1/2” x 4” Hartford 20-225, 225ppm, vibratory feeder, Re: 8527

1/2” x 5-1/8” Peltzer & Ehler NKWK-12, w/pointer, 130ppm, Re: 9557

1/2” x 5-1/8” Saspi RGVP3-20, built 2000, with pointer attachment, Re: 8495

1/2” x 5-1/8” Hilgeland TR-4/PNL, 1980, 140ppm, (pointer removed), Re: 8536

1/2” x 5-1/8” Hilgeland TR-4PN, 180ppm, w/pointer, 140ppm, Re: 9541

1/2” x 8” Waterbury #30, Chainfeed hopper, 80ppm, 4” thread, Re: 8526

9/16” x 5-1/8” Peltzer & Ehler NKW-12, 150ppm, 11kw, vibe feeder, Re: 7214

5/8” x 6” EW Menn, GW-120, 280ppm, Re: 9381

5/8” x 6” Hartford Model 30-180, Excellent condition, Re: 9637

5/8” x 6-3/8” Peltzer & Ehler NKWK-16, 110ppm, 3-5/32” thread, Re: 9556

3/4” x 7” Hilgeland TR-6, Incline Flat Die, 100ppm, 4” thread, Re: 8348/9542

3/4” x 7-1/8” Peltzer & Ehler NKWK20, w/pointer, 95ppm, Re: 9555

1” x 8” Peltzer & Ehler NKWK24, 90ppm, w/pointer, Re: 9559

THREADROLLERS ( HORIZONTAL HAND FEED FLAT DIE)

3/8” x 3-1/8” Waterbury #20 Hand Feed, 60ppm, Re: 8541

1/2” x 4-1/8” Waterbury #30 Hand Feed, 60ppm, Re: 8539

5/8” x 4-5/8” Waterbury #40, Hand Feed, 50ppm, Adj. pitman, Re; 8410

3/4” x 5-1/8” Waterbury #50, Hand Feed, 30ppm, Reconditioned, Re: 8344

1” Hilgleland #60, Hand Feed, 40ppm, Moving/Stationary die: 16”-15”,

Setup with auto feed hopper, 30HP, Helpro monitor, Re: 8458

THREADROLLERS ( 2-DIE & 3-DIE CYLINDRICAL)

2-3/4” WMW UPW 12.5x70, 2-Die Cylindrical thread roller, 1980s, Re: 8110

3” Pee Wee P20UE, 1970, Re: 9206

3-3/4” Reed Model A-22, 1/4” to 1” thrufeed, 720rpm, Re: 9517/18 (2)

3-3/4” Reed Model A-22, 1/4” to 1” thrufeed, 720rpm,

setup with vibratory hoppers to feed very short parts, Re: 9714 (5 avail.)

3-3/4” Reed Model A-23, 3-Die, Re: 9519

4” WMW UPWS-25, 2-Die Cylindrical, 1988, 7.5kw, spindle dia: 80mm, Re: 92080

4” WMW UPWS-31.5, 2-Die Cylindrical, 1980, 31.5tons, Re: 8648

4-3/8” ORT RP45, 3-Die Cylindrical, 1990, 45tons, Re: 9533

8” Kinefac MC-50-F Kine Roller, thrufeed 3”, Re: 9520

8” WMW UPW50 x 200, built 1970s, Re: 9046

8” WMW UPW-63, 2-Die Cylindrical roller, 250mm infeed, 2,000mm thrufeed,

Min/Max distance of spindles: 200/420mm, Reconditioned, Re: 8468

Complete line for threading stainless steel bars

Line includes up to (6) nine automatic threadrollers, feeding and exit

tables, straight and cut lines, tooling, parts, for threading bars up to

45mm diameter.

For more information please contact us.

Complete Plant for the Production of High Tensile

Torque Shear Bolts, Nuts and Washers up to 1” Diameter

Plant includes: Sakamura Cold Formers and Hot Nut Formers, Furnaces, Assembley Machines, Nut Tappers,Threadrollers, Shot Blasting, Wire Drawers, Hatebur Hot Nut Former, Induction Heaters, Hydraulic Press,

Air Compressor, Torque testing machines, and an extensive amount of tooling, machine parts, drawings, etc. All machines currently under power.

For more information please contact us.

Nail Plant For Sale – Complete plant to manufacture concrete nails for the construction industry.

Complete with nail machines, thread rollers, pointer, heat treating, galvanizing line, etc. All equipment in Excellent “Like New” condition.

For more information please contact us.

Complete Cell for 1” Diameter x 12” Long Parts

This cell includes 1” x 12” Double Stroke Solid Die Cold Header, 1” x 12” Bolt Trimmer, and 1” Heavy Duty Flat Die Threadroller,

including monitors, conveyors, automatic feeders, tooling parts, drawings, manuals, etc.

For more information please contact us.

Machine Source International, Inc.

232 Piccadilly Downs, Lynbrook, N.Y. 11563, USA

Tel: 516-596-6600 Fax: 516-596-6700

Contact: Mr. Robert Kleinertz

Email: Machinesource@optonline.net

Website: www.machine-source.com

Note all machines are offered subject to prior sale. This quotation information has been obtained from secure sources deemed reliable. Machine Source International, Inc. makes no warranty or guarantee, expressed or implied, as to the accuracy of the information contained herein. It is for this reason that we sincerely suggest that buyers should avail themselves of the opportunity to make an inspection prior to final purchase. We reserve the right to correct all stenographic errors.